✨ New Arrivals Just Dropped!Explore
$14.70
Original: $41.99
-65%Weldless Whirlpool Arm (Stainless)—
$41.99
$14.70The Story
Want clearer wort? Quicker chilling times? Higher hop utilization during flameout? Achieve all this and more by upgrading your system with the new Weldless Whirlpool Arm by Fermentap!
Designed to be installed underneath the handle of your kettle, this piece of equipment will allow you to achieve a perfect whirlpool in your Boil Kettle. Simply pump your wort from your ball valve, into this piece, which will jet around the inside of the kettle, forming a strong whirlpool. It will settle Trub in the center of your kettle, making it easy to pull clear wort from your ball valve. It also gives a much higher chilling efficiency when using an immersion chiller, due to the increased turbulation of wort. On top of this, the increased flow will result in higher extraction of hop oils and flavor during flameout additions!
- Made of 100% stainless steel
- It features a 1/2" Full Port ball valve and a 1/2" barb.
- The inner barbed elbow is 3/8".
- Features a 1/2" MPT outlet for hooking up your ball valve directly, along with FPT on the inside for connecting any brewing accessory you might want!
NOTE: You will need to drill a 1" hole for installation of this weldless spigot. We recommend a Step Drill Bit for this.
Please note: this item is a kit of our Weldless Ball Valve and a MPT x Barb Elbow fitting. You will need to to thread the elbow into the bulkhead after installing it on your kettle.
Description
Want clearer wort? Quicker chilling times? Higher hop utilization during flameout? Achieve all this and more by upgrading your system with the new Weldless Whirlpool Arm by Fermentap!
Designed to be installed underneath the handle of your kettle, this piece of equipment will allow you to achieve a perfect whirlpool in your Boil Kettle. Simply pump your wort from your ball valve, into this piece, which will jet around the inside of the kettle, forming a strong whirlpool. It will settle Trub in the center of your kettle, making it easy to pull clear wort from your ball valve. It also gives a much higher chilling efficiency when using an immersion chiller, due to the increased turbulation of wort. On top of this, the increased flow will result in higher extraction of hop oils and flavor during flameout additions!
- Made of 100% stainless steel
- It features a 1/2" Full Port ball valve and a 1/2" barb.
- The inner barbed elbow is 3/8".
- Features a 1/2" MPT outlet for hooking up your ball valve directly, along with FPT on the inside for connecting any brewing accessory you might want!
NOTE: You will need to drill a 1" hole for installation of this weldless spigot. We recommend a Step Drill Bit for this.
Please note: this item is a kit of our Weldless Ball Valve and a MPT x Barb Elbow fitting. You will need to to thread the elbow into the bulkhead after installing it on your kettle.
